Wireless Flash Speedlite with Metal Hot Shoe (YN-560 III)

1) Circuit design: Insulated Gate Bipolar Transistor (IGBT)

2) Guide No.: 58 meters (ISO 100, 105mm)

3) Flash mode: M, Multi

4) Triggering mode: Camera set-up, S1, S2, RX

5) Zoom range: 24, 28, 35, 50, 70, 80, 105mm

6) Vertical rotation angle: -7~90 degrees

7) Horizontal rotation angle: 0~270 degrees

8) Power supply: 4×AA size batteries (Alkaline or Ni-MH are usable), not include.

9) Lighting times: 100~1500 times (AA alkaline cell used)

10) Recycle time: approx 3s (AA alkaline cell used)

11) Color temperature: 5600k

12) Flash time: 1/200s~1/20000s

13) Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning

14) External interface: hot shoe, PC port and eternal charging port

15) Wireless triggering distance: 100m (2.4G wireless); 20~25m indoor, 10~15m outdoor

16) Additional features: The electronic flash head zooming, sound signal, automatically saving setting, power saving mode, over heat protection and advanced options

17) Dimensions: 60mm × 190mm × 78mm (Extended state)

18) Net weight: 350g

** Using:

– Using RF-602/RF-603 2.4G ultra-long-range wireless flash system

Adopted by global users trust the allways RF-602/RF-603 wireless flash system. Support 2.4G ultra-long-range wireless flash, the lead flashing distances up to 100 meters above.

– Full support for RF-603, RF-602 wireless transmitter

Same YN560-III can accept RF-603 and RF-602 wireless transmitter emits a signal, supports 16 channels, wireless flash easily.

– Large-size LCD display

The the YN560-III is equipped with large-size LCD screen, easy clear, intuitive view or set the flash of the function, and easy to use.

– Equipped with power zoom function

ZOOM button, you can make a lamp covering a focal length between 24 ~ 105mm cycle movements.

– GN58 @ ISO100, 105mm

High index 2.4G radio flash support M / Multi mode.

– Various trigger synchronization, flexible

The YN560-III can be triggered by the camera-top, 2.4G radio trigger, S1 and S2 to avoid the pre-flash-sensitive trigger.

– Equipped with an external power outlet

The YN560-III is equipped with an external power outlet, to meet your higher demand for call back speed.

– Equipped with a PC sync port

The YN560-III equipped with a standard PC synchronous port, using a PC sync cord flash sync flash.

– Voice prompt system

Open to the voice prompts, the flash voice prompts work state, so you can focus on the creative process (Note: the sound can be turned off).

– A speeding call back system

Full light output recycling time of just three seconds, even without using the new battery, but also to get the speed of call back experience, only 4 to 5 seconds; You can also use external charging box call back again accelerated.

– Advanced Options settings

The YN560-III with Advanced Options settings according to their needs, you can customize the flash function.

– Automatically save set

The YN560-III can automatically save your current operating settings, to facilitate the next time you boot.

– Metal texture hot shoe interface, rugged, reliable, and to the force.

** Working for:

– Various standard hot shoe DSLR cameras Canon/ Nikon/ Pentax / Olympus

– Not fit Sony/ Minolta

– Such as:

— Canon EOS 5D Mark III 5, 5D Mark II, 1Ds Mark [IV / III / II / I ], 1D Mark [III / II N/ II / I]

6D, 5D, 7D, 60D, 50D, 40D, 30D, 700D, 100D, 650D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, 1100D, 1000D

— Nikon D4, D3s, D3x, D3, D700, D300s, D300, D200,D100, D90, D80, D70s, D7100, D5200, D3200, D7000, D5100, D5000, D3100, D3000, D60, D40X, D800, D600

— Pentax K-7, K-x, K-m, K20D, K10D, K200D, K100D

— Olympus E5, E3, E30, E300, E620, E520, E420, E450, E-P2, E-PL2, E-P

— Panasonic G10GK, GH2GK, GH1GK, G2GK, G1GK, GF2GK, GF1GK